Description
USE & CARE
-
- Place the magnetic utensil rack in the preferred location on the wall and mark the position of the top edge as well as the extremities of each end. Remove the rack and using a spirit level, draw a horizontal pencil line in line with the rack’s top edge mark. Align the template provided with the pencil marks on the wall and tape into position. Using an appropriate 6mm diameter bit, drill centrally through each fixing hole marked on the template to a depth of 30mm into the wall. Remove template and tap wall plugs provided into holes. To affix the rack, remove plastic end caps from the faceplate, align the outer edge of each cap with its previously pencilled position, push screw through slot into wall plug and tighten end cap firmly to wall. Place faceplate over the end caps and snap into position.